The new ZEISS ScanBox 4105 RC enables the autonomous loading and measurement of small parts. These are loaded into the 3D measuring machine using a robot or a configured feeding system and placed on the rotation table module. Manual individual placement is no longer needed, and throughputs are increased. 

ZEISS ScanBox 4105 RC (Remote Control) is an optical 3D measuring machine with a motorized sliding door. Parts up to 500 mm in size can be loaded into the ZEISS ScanBox 4105 RC with a robot or an individually configured feeding system and placed on the rotation table module. The elimination of manual individual placement significantly reduces the time required and thus ensures a higher throughput in quality assurance.

Autonomous part inspection

The autonomous operation of the ZEISS ScanBox Series 4 RC increases machine utilization, speeds up measurement cycle times and allows you to deploy your personnel more efficiently. The system was specially developed for applications that require a high degree of throughput and integration.

High throughput for serial monitoring

For efficient quality assurance of series products, production processes must be monitored, scrap reduced and cost-intensive reworking minimized. The optical 3D measuring machine ZEISS ScanBox Series 4 RC with the ATOS Q sensor supports you in this: The full-field actual data of the series parts can be compared directly with the CAD model or with specifications from the measurement plan. Create inspection reports directly at the production facilities and export the data directly to statistical process-control systems.

Automated process control

Program the optical 3D measuring machine via the ergonomic user interface integrated into the control tower. With the ZEISS ScanBox 4105 RC, automated part inspection is carried out via a start signal from a higher-level controller. ZEISS offers communication interfaces based on fieldbuses (CC-Link, ProfiBus, ProfiNet, EtherCat, EtherNet/IP, OPC UA).

Maximum machine utilization and optimized processes

Exploit the full potential of the ZEISS ScanBox Series 4 RC with a feeding and loading system from ZEISS. With the ZEISS Integration Series, you can automate the loading of parts and avoid downtimes. The flow of parts and the operating time are optimized. 

Learn more here.