Brukt rørbøyer ETM80 – Maks Ø80mm
Pr. stk. NOK 110 000 ekskl. moms
Brukt rørbøyer med maks kapasitet Ø80mm.
Produsenten har gått over maskinen og tatt service og den er nå klar for ny eier.
Selges uten bøyeverktøy da kunden behold disse. Fortell hvilke rør dimensjoner du ønsker og bøye for komplett pris.
Spesifikasjoner:
ETM 80 rotary draw bending machine, a powerful and precise no mandrel tube bending machine designed for all types of tubes and profiles.
A solid, high-performance machine, entirely “Made in Italy”, capable of bending large diameter tubes on both the right and left sides.
The ETM 80 allows to bend tubes with a range diameter up to 76 x 6 mm, and can bend more than 180° with maximum finishing quality.
The machine is manufactured from a single piece of steel, with dies made from solid C45 steel.
The specially designed counter-dies system allows less mechanical effort and much faster machining than machines in the same category, guaranteeing excellent finishes even with the thinnest thicknesses. Extremely easy and quick to use thanks to the “Digital Bend Programming Touch Screen 2”, software specially created for our machines, which can select as many as 49 programs with 8 bending angles each and with automatic correction of springback. It also allows you to save your projects as repeatable programs.
The ETM 80 can be equipped with a manual rotary positioning table. This table is available in various lengths for repeatable bends in a single piece of material. When the table is attached to the bender, it helps achieve very accurate bends on varying planes, as well as consistent measurements between bends.
Reliable and well-performing machine, it is perfect for various activities and fields like hydraulic, nautical and general plant construction engineering.
Motor: 2,2kW, 400V
Gir: oljebad
Vekt: 560 kg
Størrelse: 1100x880x1200mm
Maks kapasiteter:
FE 430: 76x6mm
Aluminium: 76x8mm
Inox Aisi 304: 76x4mm
Solid Bar FE: 430: 55mm
Firkant rør FE: 60x4mm
ETM ROTARY DRAW BENDER SOFTWARE
Every ETM series machine is supplied with the “Digital Bend Programming Touch Screen 2” special software, extremely easy to use due to the intuitive “Touch” screen.
Thanks to the latest generation technologies it is possible to access main features as:
Storage of 49 programs, each of them with a 8-stop sequences in the bending operation
Calculation of the machine maximum bending capacities with reference to the material size to be bent
Graphic of the minimum bending radii
Setting of springiness material estimate (springback)
Bend counter
Remote connection “Industry 4.0”
Some more functions:
Working mode: either manual or automatic
100 MB hard disk
Alarm diagnosis
Maintenance notice